欧美色精品视频在线观看九

央視CCTV《工匠精神》入選品牌、暖氣片十大品牌——森拉特歡迎您的到來!

400-826-3533

手機版微信小秘書天貓旗艦店 京東旗艦店網站地圖

暖氣片安裝的有哪些注意事項?

Radiator installation What are the precautions?

2016-12-27

Switch to English

1、暖氣片安裝安全性是靠前要素。一般在夏季安裝的情況下,氣溫高、氣候干燥,而裝修施工現場放的裝修材料很多,為避免溫度過高引起火災,造成對暖氣片及其他建材的損害,材料應放在陰涼處,暖氣片較好懸掛在承重墻上。

2、從暖氣片使用功能上考慮,暖氣片安裝位置要合理選擇,一般將暖氣片放在窗下,這樣既可以阻止冷輻射及冷空氣環流,并且使室內溫度均衡穩定,不會讓人感覺到忽冷忽熱,有不舒適的感覺。此外還要考慮到家具的擺放,不宜把暖氣片放在長時間受熱造易發生損害的家具附近。

3、安裝暖氣片需要先根據自家的房間數量、面積、供暖系統特點等,選購適宜的暖氣片數量、材質、款式及顏色、款式等。需要消費者注意的地方是,暖氣片材質需要和自己所在小區的供暖環境相匹配,若供暖水質中氧氣含量較高,就不適宜安裝使用鋼制暖氣片。

4、安裝暖氣片在施工中要注意不能有漏水的地方,盡量保持管道是直的,連接處應使用接頭,不應使管道出現彎頭,否則阻力太大,影響系統正常運行和供暖效果。

5、必要的測試是不可缺少的。通常在施工時工人會在管道上預留閥門,裝好后進行沖壓試驗,證明沒有跑冒滴漏現象即為合格。


1, radiator installation safety is the first element. Usually in the summer installation of the case, the high temperature, dry climate, and the decoration of the site put a lot of decoration materials, in order to avoid high temperature caused by fire, resulting in radiator and other building materials damage, the material should be placed in the shade, heating Preferably, the sheet is suspended from the load bearing wall.

2, from the radiator to consider the use of function, radiator installation location to a reasonable choice, the general will be placed under the window radiator, which can prevent cold radiation and cold air circulation, and the indoor temperature equilibrium and stability, will not make people feel To the hot and cold, there are uncomfortable feeling. In addition, taking into account the placement of furniture, radiator should not be placed on the heat for a long time prone to damage caused by furniture near.

3, the installation of radiators need to first according to their number of rooms, area, heating system characteristics, choose the appropriate number of radiator, material, style and color, style and so on. Consumers need to be noted that the radiator material must be and their own district where the heating environment to match, if the heating water in the high oxygen content, it is not suitable for installation using steel radiator.

4, the installation of radiator in the construction should pay attention to where there can not be leaking, try to keep the pipe is straight, joints should be used joints should not make the pipe elbow, or resistance is too large, affecting the normal operation of the system and heating effect.

5, the necessary test is indispensable. Usually in the construction of the workers will be set aside in the pipeline valve, after a good stamping test to prove that there is no leaking phenomenon is passing passing.


欧美色精品视频在线观看九